Analytical solution of a contact problem and comparison with the results from FEM

作者：Oner Erdal^*; Yaylaci Murat; Birinci Ahmet

来源：Structural Engineering and Mechanics, 2015, 54(4): 607-622.

DOI：10.12989/sem.2015.54.4.607

• contact problem
• finite element model
• rigid punch
• semi-infinite plane
• singular integral equation

This paper presents a comparative study of analytical method and finite element method (FEM) for analysis of a continuous contact problem. The problem consists of two elastic layers loaded by means of a rigid circular punch and resting on semi-infinite plane. It is assumed that all surfaces are frictionless and only compressive normal fractions can be transmitted through the contact areas. Firstly, analytical solution of the problem is obtained by using theory of elasticity and integral transform techniques. Then, finite element model of the problem is constituted using ANSYS software and the two dimensional analysis of the problem is carried out. The contact stresses under rigid circular punch, the contact areas, normal stresses along the axis of symmetry are obtained for both solutions. The results show that contact stresses and the normal stresses obtained from finite element method (FEM) provide boundary conditions of the problem as well as analytical results. Also, the contact areas obtained from finite element method are very close to results obtained from analytical method; disagree by 0.03-1.61% Finally, it can be said that there is a good agreement between two methods.