A nanoporous carbon material derived from pomelo peels as a fiber coating for solid-phase microextraction

作者：Wang, Wenchang; Zhang, Lihong; Li, Zhi; Zhang, Shuaihua^*; Wang, Chun; Wang, Zhi^*

来源：RSC Advances, 2016, 6(115): 113951-113958.

DOI：10.1039/c6ra24225a

• METAL-ORGANIC FRAMEWORK
• STAINLESS-STEEL FIBER
• POLYCYCLIC AROMATIC-HYDROCARBONS
• WATER SAMPLES
• ENVIRONMENTAL WATER
• OXYGEN REDUCTION
• ENERGY-STORAGE
• REMOVAL
• CHROMATOGRAPHY
• SPECTROMETRY

In this work, we present a facile and economical approach to synthesize a nanoporous carbon via a KOH chemical activation process using waste pomelo peels as the biomass precursor. The nanoporous carbon derived from pomelo peels exhibits a nanoporous structure (pore size, 0.69 nm) and high surface area (1770 m(2) g(-1)). To evaluate the extraction performance of the nanoporous carbon, it was applied as a solid-phase microextraction coating for the enrichment of benzene homologues from water and soil samples prior to their determination by gas chromatography-mass spectrometry. The main influencing experimental parameters for the extraction were investigated and optimized. Under the optimum conditions, a good linearity for the signal response was achieved in the concentration range of 0.4-100.0 ng L-1 for water samples and 5.0-1000.0 ng kg(-1) for soil samples with determination coefficients (r(2)) larger than 0.9960. The limits of detection (S/N = 3) of the method ranged from 0.05 to 0.18 ng L-1 for water samples and from 0.11 to 0.18 ng kg(-1) for soil samples, respectively. The recoveries of the analytes were in the range of 81.3-112.0% with the relative standard deviations (RSDs) ranging from 1.5% to 11.4% (n - 5). The single fiber repeatability and fiber-to-fiber reproducibility values expressed as RSDs were in the range of 2.4-8.1% and 5.9-9.9%, respectively. The method was simple, convenient and feasible for the determination of benzene homologues in real samples.

• 出版日期2016
• 单位河北农业大学