Determination of Shakedown Boundary and Failure-Assessment-Diagrams of Cracked Pipe Bends

作者：Elsaadany Mostafa S^*; Younan Maher Y A; Abdalla Hany F

来源：Journal of Pressure Vessel Technology-Transactions of the ASME, 2014, 136(1): 011209.

DOI：10.1115/1.4025614

Determination of shakedown (SD) boundaries of 90-degree plain smooth pipe bends has recently received substantial attention by several researchers. However, scarce or almost no solid information is found within the literature regarding the determination of the shakedown boundary of cracked pipe bends. The current research presents two additions to the literature, namely, determination of shakedown boundary for a circumferentially cracked 90-degree pipe bend via a simplified technique utilizing the finite element (FE) method and introduction of failure-assessment diagrams (FADs) in compliance with the API 579 failure-for-service assessment of pressure vessel and piping components. The analyzed cracked pipe bend is subjected to the combined effect of steady internal pressure spectrum and cyclic in-plane closing (IPC) and opening (IPO) bending moments. Line spring elements (LSEs) are embedded in quadratic shell elements to model part-through cracks. FAD is obtained through linking the J-integral fracture mechanics parameter with the shakedown limit moments of the analyzed cracked 90-degree pipe bend. The LSE outcomes illustrated satisfactory results in comparison to the results of two verification studies: stress intensity factor (SIF) and limit load. Additionally, full elastic-plastic (ELPL) cyclic loading finite element analyses are conducted and the outcomes revealed very good correlation with the results obtained via the simplified technique. The maximum load carrying capacity (limit moment) and the elastic domain are also computed thereby generating a Bree diagram for the cracked pipe bend. Finally, Crack growth analysis is presented to complement the FAD.

• 出版日期2014-2