A Phenomenological Constitutive Model for Describing Thermo-Viscoplastic Behavior of Al-Zn-Mg-Cu Alloy Under Hot Working Condition

作者：Lin, Y. C.^*; Li, L. -T.; Jiang, Y. -Q.

来源：Experimental Mechanics, 2012, 52(8): 993-1002.

DOI：10.1007/s11340-011-9546-4

• Aluminium alloys
• Thermo-mechanical processing
• Bulk deformation
• Constitutive model

In order to predict the high-temperature deformation behavior of Al-Zn-Mg-Cu alloy, the hot compression tests were conducted in the strain rate range of (0.001-0.1)s(-1) and the forming temperature range of (573-723) K. Based on the experimental results, Johnson-Cook model was found inadequate to describe the high-temperature deformation behavior of Al-Zn-Mg-Cu alloy. Therefore, a new phenomenological constitutive model is proposed, considering the coupled effects of strain, strain rate and forming temperature on the material flow behavior of Al-Zn-Mg-Cu alloy. In the proposed model, the material constants are presented as functions of strain rate. The proposed constitutive model correlates well with the experimental results confirming that the proposed model can give an accurate and precise estimate of flow stress for the Al-Zn-Mg-Cu alloy investigated in this study.

• 出版日期2012-10
• 单位中南大学