Numerical simulation of hydraulic fracturing in circular holes

作者：Haeri, Hadi^*; Sarfarazi, Vahab; Hedayat, Ahmadreza; Zhu, Zheming

来源：Computers and Concrete, 2016, 18(6): 1135-1151.

DOI：10.12989/cac.2016.18.6.1135

• ligament angle
• pre-existing joints
• opening-mode fracture
• hydraulic fractures
• joint offset angle

For investigating the effect of the pre-existing joints on the initiation pattern of hydraulic fractures, the numerical simulation of circular holes under internal hydraulic pressure with a different pattern of the joint distributions are conducted by using a finite element code, FRANC2D. The pattern of hydraulic fracturing initiation are scrutinized with changing the values of the joint length, joint offset angle. The hydraulic pressures with 70% of the peak value of borehole wall breakout pressure are applied at the similar models. The simulation results suggest that the opening-mode fracture initiated from the joint tip and propagated toward the borehole for critical values of ligament angle and joint offset angle. At these critical values, the crack grow length is influenced by joint ligament length. When the ligament length is less than 3 times the borehole diameter the crack growth length increases monotonically with increasing joint length. The opening-mode fracture disappears at the joint tip as the ligament length increases.

• 出版日期2016-12
• 单位四川大学