Adsorption of copper from the sulphate solution of low copper contents using the cationic resin Amberlite IR 120

作者：Jha Manis Kumar; Van Nguyen Nghiem; Lee Jae chun^*; Jeong Jinki; Yoo Jae Min

来源：Journal of Hazardous Materials, 2009, 164(2-3): 948-953.

DOI：10.1016/j.jhazmat.2008.08.103

• Copper
• Ion exchange
• Electronic effluents
• Amberlite IR-120

In view of the increasing importance of the waste processing and recycling to meet the strict environmental regulations, the present investigation reports an adsorption process using the cationic exchanger Amberlite IR 120 for the recovery/removal of copper from the synthetic sulphate solution containing copper <= 0.7 mg/mL similar to the CMP waste effluent of electronic industry. Various process parameters, viz. contact time, solution pH, resin dose, and acid concentration of eluant were investigated for the adsorption of copper from the effluents. The 99.99% copper was found to be adsorbed from the sulphate solution containing copper 0.3-0.7 mg/mL of solution (feed pH 5) at A/R ratio 100 and eq. pH 2.5 in contact time 14 min. The mechanism for the adsorption of copper was found to follow Langmuir isotherm and second order From the loaded organic, copper was eluted effectively by 1.8 M sulphuric acid at A/R ratio 25. The raffinate obtained after the recovery copper could be disposed safely without affecting the environment.

• 出版日期2009-5-30