Sorption and filtration of Hg(II) ions from aqueous solutions with a membrane containing poly(ethyleneimine) as a complexing polymer

作者：Bes**ousse H; Rhlalou T; Verchere J F; Lebrun L^*

来源：Journal of Membrane Science, 2008, 325(2): 997-1006.

DOI：10.1016/j.memsci.2008.09.035

• Mercury
• Poly(ethyleneimine)
• Poly(vinyl alcohol)
• Complexation
• Filtration

The performances of a PVA/PEI complexing membrane for the removal of Hg(II) from aqueous solutions were investigated by performing sorption and filtration experiments. This membrane, that was previously shown to ensure efficient sorption of the heavy metal ions Pb(II), Cd(II) and Cu(II) at pH 5, presented a higher affinity for Hg(II) at pH 2.5. The sorption equilibrium was satisfactorily represented by the Langmuir model. In view of possible application to the treatment of industrial wastewaters, the effects of parameters such as pH, temperature, water hardness, and the presence of complexing chloride anions were investigated. The effect of increasing temperature was not straightforward: the complexation equilibrium constant decreased, but the mass of mercury sorbed increased, probably due to the higher mobility of the polymer chains that made internal sites available for complexing mercury. The maximum retention capacity of the membrane was 311 mg Hg g(-1). Also, operating at large calcium or chloride concentrations was not detrimental to the membrane performances. For regeneration of the membrane, a 0.05 M solution of EDTA is recommended on the basis of limited performance loss. When used in the filtration mode, the elimination ratio of Hg(II) was close to 99%.

• 出版日期2008-12-1