A novel application of dielectric stack actuators: a pumping micromixer

作者：Solano Arana Susana^*; Klug Florian; Moessinger Holger; Foerster Zuegel Florentine; Schlaak Helmut F

来源：Smart Materials and Structures, 2018, 27(7): 074008.

DOI：10.1088/1361-665X/aac302

• electroactive polymer
• microfluidics
• micromixer
• stack actuator
• electromechanical actuator
• pump

The fabrication of pumping micromixers as a novel application of dielectric stack actuators is proposed in this work. DEA micromixers can be valuable for medical and pharmaceutical applications, due to: firstly, the biocompatibility of the used materials (PDMS and graphite); secondly, the pumping is done with peristaltic movements, allowing only the walls of the channel to be in contact with the liquid, avoiding possible contamination from external parts; and thirdly, the low flow velocity in the micromixers required in many applications. The micromixer based on peristasltic movements will not only mix, but also pump the fluids in and out the device. The developed device is a hybrid micromixer: active, because it needs a voltage source to enhance the quality and speed of the mixing; and passive, with a similar shape to the well-known Y-type micromixers. The proposed micromixer is based on twelve stack actuators distributed in: two pumping chambers, consisting of four stack actuators in series; and a mixing chamber, made of four consecutive stack actuators with 30 layers per stack. The DEA micromixer is able to mix two solutions with a flow rate of 21.5 mu l min(-1) at the outlet, applying 1500 V at 10 Hz and actuating two actuators at a time.

• 出版日期2018-7