科研之友
微信
新浪微博
Facebook
分享链接
摘要
On a native graphite surface, 15 nm-thick solid-state nanogears are nanofabricated with a 30 nm outer diameter and six teeth. The nanogears are manipulated one at a time by the tip of an atomic force microscope using the sample stage displacements for the manipulation and recording of the corresponding manipulation signals. For step heights below 3.0 nm, nanogears are manipulated up and down native graphite surface step edges. In the absence of a central shaft per nanogear, gearing between nanogears is limited to a few 1/12 turns for six teeth. When the graphite step is higher than 3 nm, a rack-and-pinion mechanism was constructed along the edge with a 90 nm nanogear pinion.
- 出版日期2014-11-21
- 单位National institute for materials science; National Institute for Materials Science
