Analytical Design Method of High-Tc Coated Conductor for a Resistive Superconducting Fault Current Limiter Using Finite Element Method

作者：Kim Young Jae^*; Park Dong Keun; Yang Seong Eun; Kim Won Cheol; Ahn Min Cheol; Yoon Yong Soo; Kwon Na Young; Lee Haigun; Ko Tae Kuk

来源：IEEE Transactions on Applied Superconductivity, 2010, 20(3): 1172-1176.

DOI：10.1109/TASC.2010.2040385

• Coated conductor
• fault current test
• numerical analysis
• recovery time measurement
• resistive superconducting fault current limiter

Electrical and thermal characteristics of a high-Tc superconducting (HTS) tape have close relation to a performance of a resistive type superconducting fault current limiter (SFCL). When an HTS coated conductor (CC) is applied to the SFCL, because the CC is a composite conductor, dimensions and material properties including electrical resistivity, thermal conductivity, and volumetric heat capacity of substrate, silver layer, YBCO, and stabilizer of the CC will affect to the fault current limiting performance and recovery time. This paper presents experimental results about fault current test of commercialized CCs to evaluate their compatibilities for resistive SFCLs and a numerical analysis using finite element method to design an HTS conductor for the SFCLs. The results from the analytical models of the CCs were compared to the experimental results. An HTS tape which is more suitable for the resistive type SFCLs was proposed as a conclusion.

• 出版日期2010-6