Highly Efficient Polymer-Based Optoelectronic Devices Using PEDOT:PSS and a GO Composite Layer as a Hole Transport Layer

作者：Yu Jae Choul; Jang Jeong In; Lee Bo Ram; Lee Geon Woong; Han Joong Tark^*; Song Myoung Hoon

来源：ACS Applied Materials & Interfaces, 2014, 6(3): 2067-2073.

DOI：10.1021/am4051487

• PEDOT:PSS
• graphene oxide (GO)
• polymer solar cells (PSCs)
• polymer light-emitting diodes (PLEDs)

We demonstrate highly efficient polymer light-emitting diodes (PLEDs), as well as polymer solar cells (PSCs), using a solution-processable poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS):graphene oxide (GO) (PEDOT:GO) composite layer as hole transport layers (HTLs). The PEDOT:GO composite HTL layer shows enhanced charge carrier transport due to improved conductivity by benzoid-quinoid transitions with a well-matched work function between GO (4.89 eV) and PEDOT:PSS (4.95 eV). Moreover, it reduces remarkably exciton quenching and suppresses recombinations that bring higher charge extraction in PSCs and increases the recombinations of holes and electrons within the active layer by the blocking behavior of the electrons from a fluorescent semiconductor due to the existence of GO with large bandgap (similar to 3.6 eV) in the PEDOT:GO composite layer, therefore leading to an enhancement of device efficiency in PLEDs and PSCs. The optimized PLEDs and PSCs with a PEDOT:GO composite HTL layer shows the maximum luminous efficiency of 21.74 cd/A (at 6.4 V) for PLEDs, as well as the power conversion efficiency of 8.21% for PSCs, which were improved by similar to 220 and 12%, respectively, compared to reference PLEDs and PSCs with a PEDOT:PSS layer.

• 出版日期2014-2-12