A coral-like macroporous gold-platinum hybrid 3D electrode for enzyme-free glucose detection

作者：Lee Yi Jae; Park Jae Yeong^*

来源：Sensors and Actuators B: Chemical , 2011, 155(1): 134-139.

DOI：10.1016/j.snb.2010.11.037

• Macroporous Au
• Au-Pt hybrid
• Pt nanoparticles
• Electroplating
• Enzyme-free
• Glucose

We are introducing a macroporous Au-Pt hybrid 3D electrode to be used for enzyme-free glucose detection. The proposed hybrid electrode was fabricated with a three dimensional structure by electroplating platinum nanoparticles onto the surface of the coral-like macroporous Au. It was then physically analyzed by using field emission scanning electron microscopy (FESEM). The porosity and window pore size of the macroporous Au electrode were 50% and 100-300 nm, respectively. The diameters of the Pt nanoparticles ranged from 10 to 15 nm. Through cyclic voltammograms in a 1 M sulfuric acid solution, we confirmed that the hybrid electrode exhibited a much larger surface activation area with a roughness factor (RF) of 2024,7 than the macroporous Au electrode with a roughness of 46.07. The highly improved surface activation area was caused by the electroplated Pt nanoparticles. The hybrid electrode exhibited a much stronger electrocatalytic activity due to glucose oxidation than the macroporous Au electrode. At 0.4 V. it responded linearly to the glucose up to 20 mM in a neutral media with a detection limit of 0.025 mM and detection sensitivity of 39.53 mu A mM(-1) cm(-2) without being affected by interfering species. It also showed a stable recovery response to the step changes of the glucose concentration.

• 出版日期2011-7-5