An Experimental Study of the Influence of in-Plane Fiber Waviness on Unidirectional Laminates Tensile Properties

作者：Zhao, Cong; Xiao, Jun^*; Li, Yong; Chu, Qiyi; Xu, Ting; Wang, Bendong

来源：Applied Composite Materials, 2017, 24(6): 1321-1337.

DOI：10.1007/s10443-017-9590-z

• Automated fiber placement
• Process induced defects
• In-plane fiber waviness
• Longitudinal tensile properties

As one of the most common process induced defects of automated fiber placement, in-plane fiber waviness and its influences on mechanical properties of fiber reinforced composite lack experimental studies. In this paper, a new approach to prepare the test specimen with in-plane fiber waviness is proposed in consideration of the mismatch between the current test standard and actual fiber trajectory. Based on the generation mechanism of in-plane fiber waviness during automated fiber placement, the magnitude of in-plane fiber waviness is characterized by axial compressive strain of prepreg tow. The elastic constants and tensile strength of unidirectional laminates with in-plane fiber waviness are calculated by off-axis and maximum stress theory. Experimental results show that the tensile properties infade dramatically with increasing magnitude of the waviness, in good agreement with theoretical analyses. When prepreg tow compressive strain reaches 1.2%, the longitudinal tensile modulus and strength of unidirectional laminate decreased by 25.5% and 57.7%, respectively.

• 出版日期2017-12
• 单位南京航空航天大学