Determination of uranium in seawater by flow-injection preconcentration on dodecylamidoxime-impregnated resin and spectrophotometric detection

作者：Oguma Koichi^*; Suzuki Toshihiro; Saito Kyoichi

来源：Talanta, 2011, 84(5): 1209-1214.

DOI：10.1016/j.talanta.2010.12.020

• Uranium
• Seawater
• Dodecylamidoxime-impregnated resin
• Flow injection analysis
• Spectrophotometric detection

A flow injection method has been developed for the determination of uranium in seawater combining the on-line preconcentration with spectrophotometric detection. An aliquot (10 mL) of the seawater sample adjusted to pH 5.5 was injected into the analytical system and uranium was adsorbed on the column packed with styrene-divinylbenzene copolymer resin (Bio-Beads SM-2) modified with dodecylamidoxime which showed high selectivity to uranium. Uranium was then eluted with 0.01 M hydrochloric acid and detected spectrophotometrically after the reaction with Chlorophosphonazo III. Interference from calcium and strontium was masked with cyclohexanediaminetetraacetic acid added to the chromogenic reagent solution. The sample throughput, the detection limit (3 sigma), and the preconcentration factor were 23 per hour, 0.13 mu g/L, and 20, respectively, when the sample injection volume was kept at 10 mL. The precision at the 2 mu g/L level was less than 4% (RSD). The proposed method was applied to the determination of uranium in the seawater samples collected off the Boso peninsula, Japan and the uranium concentration was found to be ca. 3 mu g/L, which is close to the literature data. The yield of the recovery test ranged from 95% to 99%.

• 出版日期2011-6-15