Affordable Ink-Jet Printed Antennas for RFID Applications

作者：Pranonsatit Suneat^*; Worasawate Denchai; Sritanavut Parichart

来源：IEEE Transactions on Components, Packaging and Manufacturing Technology, 2012, 2(5): 878-883.

DOI：10.1109/TCPMT.2012.2186571

• Direct-write method
• ink-jet printing
• radio-frequency identification (RFID) measurements
• RFID tag antennas

With the increasing demands of radio-frequency identification (RFID) applications, an alternative ink-jet printing technique for RFID tag antenna is demonstrated. Commercially available ink-jet printers are adapted for conductive printing, in order to minimize manufacturing cost. Paper-based dipole antenna and dipole with a tuning stub antenna were designed. The antennas were ink-jet printed and assembled with RFID chips. The performances of the fabricated tags were measured through the reading range. With reference to equivalent isotropically radiated power of 4 W at 923 MHz, the reading range of tag with dipole antenna is around 9 m and of tag with dipole with a tuning stub is nearly 13 m. These performances are comparable to those of commercial tags. The advantages of the proposed printing technique are simplicity, flexibility and, more importantly, affordability. The technique can, in addition, contribute to further development and enhance extension of RFID applications.

• 出版日期2012-5