A discrete particle approach to simulate the combined effect of blast and sand impact loading of steel plates

作者：Borvik T^*; Olovsson L; Hanssen A G; Dharmasena K P; Hansson H; Wadley H N G

来源：Journal of the Mechanics and Physics of Solids, 2011, 59(5): 940-958.

DOI：10.1016/j.jmps.2011.03.004

• Blast loads
• Experimental tests
• Sand ejecta
• Discrete particles
• Numerical simulations

The structural response of a stainless steel plate subjected to the combined blast and sand impact loading from a buried charge has been investigated using a fully coupled approach in which a discrete particle method is used to determine the load due to the high explosive detonation products, the air shock and the sand, and a finite element method predicts the plate deflection. The discrete particle method is based on rigid, spherical particles that transfer forces between each other during collisions. This method, which is based on a Lagrangian formulation, has several advantages over coupled Lagrangian-Eulerian approaches as both advection errors and severe contact problems are avoided. The method has been validated against experimental tests where spherical 150 g C-4 charges were detonated at various stand-off distances from square, edge-clamped 3.4 mm thick AL-6XN stainless steel plates. The experiments were carried out for a bare charge, a charge enclosed in dry sand and a charge enclosed in fully saturated wet sand. The particle-based method is able to describe the physical interactions between the explosive reaction products and soil particles leading to a realistic prediction of the sand ejecta speed and momentum. Good quantitative agreement between the experimental and predicted deformation response of the plates is also obtained.

• 出版日期2011-5