A heat transfer model for condensation accounting for non-equilibrium effects

作者：Xiao Jiange; Hrnjak Pega^*

来源：International Journal of Heat and Mass Transfer, 2017, 111: 201-210.

DOI：10.1016/j.ijheatmasstransfer.2017.03.019

• In-tube condensation
• Heat transfer model
• Non-equilibrium

A heat transfer model is proposed in this paper for condensation of annular and stratified flow in horizontal smooth round tubes accounting for the non-equilibrium effects. The model is based on a non-equilibrium flow regime map and void fraction correlation that is developed from diabatic flow visualization and film thickness measurement. The model unifies single-phase and two-phase heat transfer models into one continuous function throughout the superheated, condensing-superheated, two-phase, condensing-subcooled and subcooled regions with seamless transition in between. Film heat transfer coefficient based on the interfacial temperature of the flow is used as a tool for the modeling in the presence of two-phase flow, which is later converted back to heat transfer coefficient based on the bulk temperature of the flow. The two-phase flow model is developed for the annular and stratified flow. The effects of interfacial waviness, liquid entrainment, wall subcooling, gravity, tube diameter as well as non-equilibrium are discussed in separated sections. Data obtained from different refrigerants and working conditions are used for the validation of the model.

• 出版日期2017-8