NiO/YSZ, anode-supported, thin-electrolyte, solid oxide fuel cells fabricated by gel casting

作者：Zhang Lan; Jiang San Ping^*; Wang Wei; Zhang Yujun

来源：Journal of Power Sources, 2007, 170(1): 55-60.

DOI：10.1016/j.jpowsour.2007.03.080

• solid oxide fuel cells
• NiO/stabilized yttria-zircoma (YSZ) anode substrates
• gel casting
• pptimization
• oeak power
• graphite pore-former

A simple and cost-effective gel-casting technique is developed and optimized to fabricate NiO/stabilized yttria-zirconia (YSZ) anode-supported solid oxide fuel cells (SOFCs). The effect of ammonium poly-(methacrylate) (PMAA) dispersant and pH on the zeta potential of YSZ and NiO particles and the viscosity of the NiO/YSZ slurries is studied in detail. The results show that the absolute zeta potential of YSZ and NiO particles reaches a maximum value at pH value similar to 10 and the viscosity of the NiO/YSZ slurry is lowest when the PMAA dispersant content is 1.5 wt.%. A gel-cast NiO/YSZ anode-supported button cell with a spin-coated, thin, YSZ electrolyte film (similar to 9 mu m) and a La0.72Sr0.18MnO3-delta (LSM)/YSZ composite cathode gives a peak power output of 1.07 and 0.65 W cm(-2) at 900 and 800 degrees C under humidified hydrogen and air. The effect of a graphite pore-former in the gelation and microstructure of NiO/YSZ anode substrates is investigated.

• 出版日期2007-6-30
• 单位南阳理工学院; 山东大学