摘要

A vertical cylinder was applied as a heat source into a water pool; the vibrations were imposed into the heater with different heat fluxes, and the frequencies were adjusted at 10, 15, 20, and 25Hz. An imaging system was employed to observe the produced bubbles around the cylindrical heat source. The results showed that the boiling heat transfer was enhanced under the vibrations with a shorter transient process, and the wall temperature also decreased. The best enhancement ratio was achieved at the frequency of 25Hz and a heat flux value of 30kW/m(2) as a consequence of imposed vibrations.

  • 出版日期2014-10-20