Numerical simulation of the hydrogen storage with reaction heat recovery using metal hydride in the totalized hydrogen energy utilization system

作者：Maeda Tetsuhiko^*; Nishida Keiichi; Tange Manabu; Takahashi Toru; Nakano Akihiro; Ito Hiroshi; Hasegawa Yasuo; Masuda Masao; Kawakami Yoshiaki

来源：International Journal of Hydrogen Energy, 2011, 36(17): 10845-10854.

DOI：10.1016/j.ijhydene.2011.06.024

• Hydrogen energy system
• Hydrogen storage
• Metal hydride
• Reaction heat recovery
• Simulation model

Numerical simulation of a hydrogen storage tank of a Totalized Hydrogen Energy Utilization System (THEUS) for application to commercial buildings was done to verify the practicality of THEUS. THEUS consists of a fuel cell, water electrolyzer, hydrogen storage tank and their auxiliary machinery. The hydrogen storage tanks with metal hydrides for load leveling have been previously experimentally investigated as an important element of THEUS. A hydrogen storage tank with 50 kg AB5 type metal hydride was assembled to investigate the hydrogen-absorbing/desorbing process, which is exothermic/endothermic process. The goal of this tank is to recover the cold heat of the endothermic process for air conditioning, and thus improve the efficiency of THEUS. To verify the practical effectiveness of this improved system, we developed a numerical simulation code of hydrogen storage tank with metal hydride. The code was validated by comparing its results with experimental results. In this code the specific heat value of the upper and lower flanges of the hydrogen storage tank was adjusted to be equal to the thermal capacity of the entire tank. The simulation results reproduce well the experimental results.

• 出版日期2011-8