科研之友
微信
新浪微博
Facebook
分享链接
摘要
Relative output factors are used in radiation therapy for treatment planning purposes including treatments using kilovoltage X-ray beams. The output factor is the relative dose output for a particular applicator relative to a reference applicator. Due to the differences in the scatter contribution from the inside of an applicator, it is more accurate if output factors are measured for all combinations of X-ray beam energy and applicator. Previously published papers and various kilovoltage X-ray beam dosimetry protocols have discussed the validity of using various cylindrical and parallel plate ionization chambers for relative output factor measurements. In this work, we evaluated the suitability of Gafchromic (TM) EBT3 film for the determination of output factors for kilovoltage X-ray beams. Output factors were measured with Gafchromic (TM) EBT3 film for beam qualities of 50, 75, 100 and 125 kVp and applicator sizes of 2, 3, 4 cm diameter, 8 x 8 and 12 x 12 cm(2) square applicators. The film read out was performed with a flatbed EPSON Expression 10000XL scanner. The measured data was compared with benchmark data from measurements using an Advanced Markus ionisation chamber as well as comparing with ratios of published backscatter factor values. The agreement between output factors measured with EBT3 film and the ionisation chamber was generally better than 2 %, with the largest difference of 3.3 % occurring for the 2 cm diameter field with the 50 kVp X-ray beam. These differences were consistent with the estimated total uncertainty in the measurements as calculated by the ISO GUM. The agreement between the output factors measured with film and the published BSFs was generally better than 5 % but differences of up to 12 % occurred for the smallest field size. The results demonstrate that Gafchromic (TM) EBT3 film is a suitable dosimeter for output factor measurements of kilovoltage X-ray beams.
- 出版日期2013-12
- 单位河北医科大学
