Use of Centroidal Voronoi Diagram to find optimal gate locations to minimize mold filling time in resin transfer molding

作者：Wang J; Simacek P; Advani S G^*

来源：Composites Part A: Applied Science and Manufacturing , 2016, 87: 243-255.

DOI：10.1016/j.compositesa.2016.04.026

• Liquid composite molding
• Resin transfer molding
• Process simulation
• Computational modeling

In Resin Transfer Molding (RTM) processes, liquid resin is injected into a dry reinforcement structure to create a composite part within given time limits. To reduce the fill time, resin may be injected into the mold through multiple gates. The minimum number of gates and their locations needs to be determined. To reduce the number of scenarios to be simulated, an iterative method is implemented for multiple-gate injection optimization. The inlet nodes on the mesh surface are used to generate a Voronoi Diagram of the mold geometry. Then the optimal Centroidal Voronoi Diagram (CVD) of the mold surface is searched iteratively. It is shown that the generation points associated with the optimal CVD correspond with the gate locations that yield the shortest fill time. The results are compared with exhaustive search and genetic algorithms results to illustrate the efficiency and accuracy of CVD method.

• 出版日期2016-8