摘要

Objectives. To investigate the kinetic process of water diffusion and mass change in new resin-matrix composites during water sorption/desorption cycles. Methods. Five new resin-matrix composites were investigated [Filtek (R) Silorane (FS), GC Gradia Direct Anterior (GDA), GC Gradia Direct Posterior (GDP), GC Kalore (GCK), Vertise (R) Flow (VF)]. Five disk-shaped specimens, per material (15.0 +/- 0.1) mm diameter by (2.0 +/- 0.1) mm, were prepared according to ISO 4049. Each disk was immersed separately in de-ionizedwater for 150 d and then reconditioned for 75 d; all at (37 +/- 1). C. Mass was measured at different time intervals. Perspex disks were used as control. Data analysis was done by repeated measures ANOVA, one-way ANOVA and Tukey's post hoc test (p < 0.05). Results. The water sorption (mu g/mm(3)) after 150 d immersion ranged from 13.51 mu g/mm(3) (+/- 0.40) for FS to 71.96 mu g/mm(3) (+/-0.90) for VF. The solubility ranged up to 16.95 mu g/mm(3) (+/-0.79) for VF. A significant mass reduction occurred in VF after the peak value [73.63 mu g/mm(3) (+/-0.31)] of water sorption was reached at 42 d. VF had the highest diffusion-coefficient for sorption: 5.23 x 10(-9) cm(2)/s (+/-0.38) and desorption: 11.72 x 10(-9) cm(2)/s (+/-0.16). Percentage sorption differences were significant for all materials (p < 0.001), except between GCK and GDP. The early correlation between mass change and square root of time was linear. Significance. Each resin-matrix composite varied in sorption/desorption cycles which may affect clinical service. A concurrent solubility process occurred during sorption of the self-adhering composite VF. The silorane composite FS exhibited minimal sorption.