Alloying behaviour of electroplated Ag film with its underlying Pd/Ti film stack for low resistivity interconnect metallization

作者：Ezawa Hirokazu; Miyata Masahiro; Tatsumi Kohei

来源：Journal of Alloys and Compounds, 2014, 587: 487-492.

DOI：10.1016/j.jallcom.2013.10.182

• Ag thin film
• Electroplating
• Electrical resistivity
• Ag-Pd alloy
• Pd-Ti intermetallic phases
• Interconnect materials

In this paper, viability of electroplated Ag film into device application was studied. Alloying behavior of the Ag film with its underlying Pd(50 nm)/Ti(100 nm) film stack was investigated with respect to heat treatment at different temperatures from 400 degrees C to 800 degrees C in an argon ambient. After annealing at 400 degrees C, the electrical resistivity of the Ag film increased due to Pd alloying with Ag. Formation of Pd-Ti intermetallic phases became dominant over Ag-Pd alloying with increasing annealing temperature, leading to the resistivity decrease of the Ag film. The resistivity of the 800 degrees C annealed Ag film approached that of its as-plated Ag film. The excess Ti atoms which were not consumed to form the intermetallic phases with the Pd atoms migrated to the Ag film surface to form Ti oxides along the Ag grain boundaries on the topmost film surface. The Ag/Pd/Ti film stack has been confirmed to maintain the resistivity of the Ag film at as-plated low levels after high temperature annealing. This paper also discusses process integration issues to enable the Ag metallization process for future scaled and three dimensionally chip stacked devices.

• 出版日期2014-2-25