Design of heat sink for improving the performance of thermoelectric generator using two-stage optimization

作者：Wang Chien Chang; Hung Chen I; Chen Wei Hsin^*

来源：Energy, 2012, 39(1): 236-245.

DOI：10.1016/j.energy.2012.01.025

• Thermoelectric generator (TEG)
• Heat sink design
• Two-stage optimization
• Compromise programming
• Scaling effect
• Finite element scheme

Thermoelectric (TE) devices can provide clean energy conversion and are environmentally friendly; however, little research has been published on the optimal design of air-cooling systems for thermoelectric generators (TEGs). The present study investigates the performance of a TEG combined with an air-cooling system designed using two-stage optimization. An analytical method is used to model the heat transfer of the heat sink and a numerical method with a finite element scheme is employed to predict the performance of the TEG. In the first-stage optimization, the optimal fin spacing for a given heat sink geometry is obtained in accordance with the analytical method. In the second-stage optimization, called compromise programming, decreasing the length of the heat sink by increasing its frontal area (WHSHf) is the recommended design approach. Using the obtained compromise point, though the heat sink efficiency is reduced by 20.93% compared to that without the optimal design, the TEG output power density is increased by 88.70%. It is thus recommended for the design of the heat sink. Moreover, the TEG power density can be further improved by scaling-down the TEG when the heat sink length is below 14.5 mm.

• 出版日期2012-3