A multilayer thin-film screen-printed triboelectric nanogenerator

作者：Hong Daewoong; Choi Young Man^*; Jang Yunseok; Jeong Jaehwa^*

来源：International Journal of Energy Research, 2018, 42(11): 3688-3695.

DOI：10.1002/er.4092

• multilayer
• screen printing
• thin film
• triboelectric nanogenerator

In this study, we developed a multilayer thin-film triboelectric nanogenerator (MT-TENG) that incorporates a honeycomb-patterned spacer fabricated via screen printing by using ultraviolet curable ink. The printed spacer, a thin polymer layer, and thin metal electrodes enable the formation of a single thin-film structure. When force is applied to the thin-film TENG, the honeycomb-patterned spacer helps the polymer layer deform elastically through the opening of the pattern and contact the electrode. We implemented an MT-TENG by stacking 3 30mmx30mmx1.4mm TENG layers electrically connected in parallel. The electrical performances of the manufactured MT-TENG with respect to the open-circuit voltage and short-circuit current were 11.45V and 4.46A, respectively. The instantaneous output power density was 10.56W/cm(3) (13.30W). In addition, an MT-TENG shoe insole was fabricated to harvest energy from human walking. We demonstrated that the fabricated shoe insole could light up 9 commercial green light-emitting diodes during walking to have an open-circuit voltage of about 20V.

• 出版日期2018-9