科研之友
微信
新浪微博
Facebook
分享链接
摘要
Shear wave propagation in soil is a physical phenomenon and has been used widely for monitoring and seismic property assessment in geotechnical engineering. Shear wave velocity Vs and small-strain shear modulus G0 are the key parameters in defining material response to various dynamic loadings. To date, the dependencies of Vs and G0 on saturation, especially in high suction range, are still not well understood because of the limited testing methodology and experimental evidence. In this study, the authors present a new laboratory instrumentation of measuring shear wave propagation in different types of unsaturated soils. Low relative humidity and water mist injection environment are used for measuring shear wave velocity under both drying and wetting conditions. Bender element technique was used to measure the shear wave responses. Step function was used as excitation, and determination of a first arrival time was identified and consistently used for all shear wave measurements. Shear wave evolution and the calculated Vs and G0 with varying volumetric water content under zero total stress condition along drying and wetting are presented. The effects of different soil-water regimes on the evolution of G0 are examined. It is found that Vs or G0 depends highly on soil types, saturation, and drying/wetting state. Parameter Vs or G0 is the lowest when a soil is saturated and the highest when it is dryvarying from tens of meters per second for Vs or a few megapascals for G0 at full saturation for all soils to up to 1,800m/s of Vs or 2GPa of G0 in clayey soil at dry state. The variability of Vs or G0 on soil type becomes more pronounced as soil has more clayey materials. It is also identified that hydraulic hysteresis of Vs or G0 is prominent only in the capillary water retention regime for all types of soil.
- 出版日期2016-11
