Application of response surface methodology to determine effects of operational conditions on in-bed combustion fraction in vortexing fluidized-bed combustor using different fuels

作者：Cao, Songshan; Duan, Feng; Zhang, Lihui; Chyang, ChienSong^*; Yang, ChihYun

来源：Energy, 2017, 139: 862-870.

DOI：10.1016/j.energy.2017.08.057

• Combustion fraction
• Swirling effect
• Sensitivity analysis
• Fluidized-bed
• Model

Distinct secondary gas injection modes of a vortexing fluidized-bed combustor (VFBC) affect combustion fraction distribution, resulting in different combustion and pollutant emissions characteristics. To determine the important operational conditions, correlations that consider most of the VFBC parameters were derived to predict the in-bed combustion fraction in VFBC. The predictions obtained using the regression correlation analysis were in good agreement with the results of present experiments and with previously published results. Response surface,methodology (RSM) was used to analyze the sensitivity of different coded factors based on established model. A new correlation equation, with a fewer parameters, based on the sensitivity analysis, was also developed and exhibited a positive predictive accuracy. Results demonstrate that the primary gas ratio, particle size, and fuel type significantly affect the combustion fraction. The in-bed combustion fraction increases with increasing particle size, and decreases with increasing primary gas ratio and the ratio of volatile to fixed carbon.

• 出版日期2017-11-15
• 单位安徽工业大学