科研之友
微信
新浪微博
Facebook
分享链接
摘要
The interaction between a type-I blunt crack and a near-tip void were modeled by the two-dimensional discrete dislocation dynamics (2-D DDD), with special emphasis on the void growth, crack-tip deformation and their size effect. Different from the classical crystal plasticity-based FE modeling, the present 2-D DDD modeling clearly indicates that, even for the type-I opening crack, the horizontal slip bands connecting the crack tip and the void surface are easily formed, especially when the ligament between the cracktip and void surface is not too long. Besides the horizontal slip bands, some asymmetric slip bands which are at an oblique angle to the horizontal x-axis can also be formed and intersect with the micro-void. On two coupled parallel slip bands, some oppositely signed dislocations, which can be regarded as equivalent prismatic dislocation loops, glide toward the void/crack-tip surface and thus drive the void growth and the crack tip further blunting. In addition, the size effect by ligament length and void radius on void growth and crack-void interaction has also been investigated carefully. It was found that the size effect is closely related to the formation of horizontal shear slip bands. There exists a critical void radius, under which the near-tip void tends to change into a flat shape and its area decreases gradually with increasing the applied stress intensity factor (SIF) K. These results might be helpful for a better understanding of the fracture and damage mechanisms in the crack-tip process zone.
- 出版日期2015-3-15
- 单位华中科技大学
