A mid-infrared scanned-wavelength laser absorption sensor for carbon monoxide and temperature measurements from 900 to 4000 K

作者：Vanderover J; Oehlschlaeger M A^*

来源：Applied Physics B: Lasers and Optics , 2010, 99(1-2): 353-362.

DOI：10.1007/s00340-009-3849-5

Mid-infrared laser absorption sensors based on quantum cascade laser (QCL) technology offer the potential for high-sensitivity, selective, and high-speed measurements of temperature and concentration for species of interest in high-temperature environments, such as those found in combustion devices. A new mid-infrared QCL absorption sensor for carbon monoxide and temperature measurements has been developed near the intensity peak of the CO fundamental band at 4.6 mu m, providing orders-of-magnitude greater sensitivity than the overtone bands accessible with telecommunications lasers. The sensor is capable of probing the R(9), R(10), R(17), and R(18) transitions of the CO fundamental ro-vibrational band which are located at frequencies where H(2)O and CO(2) spectral interference is minimal. Temperature measurements are made via scanned-wavelength two-line ratio techniques using either the R(9) and R(17) or the R(10) and R(18) line pairs. The high-speed (1-2 kHz) scanned-wavelength sensor is demonstrated in room-temperature gas cell measurements of CO and, to demonstrate the potential of the sensor for high-temperature thermometry, in shock-heated gases containing CO for a very wide range of temperature (950-3500 K) near 1 atm. To our knowledge, these measurements represent the first use of QCL-based absorption sensor for thermometry at elevated combustion-like temperatures. The high-temperature measurements of CO mole fraction and temperature agree with the post-reflected-shock conditions within +/- 1.5% and +/- 1.2% (1 sigma deviation), respectively.

• 出版日期2010-4