科研之友
微信
新浪微博
Facebook
分享链接
摘要
The Accelerator-Driven System (ADS) is one of the most effective tools to deal with the spent fuels by nuclear transmutation. In the ADS, the neutrons could be produced by bombarding a proper spallation target with a concentrated beam of high-energy accelerator protons. Subsequently, the produced neutrons drive the nuclear transmutation in the sub-critical reactor. Therefore, the spallation target is an essential part of the ADS. Recently researchers proposed a gravity-driven dense granular target, which has both solid and fluid target characteristics. @@@ This study developed the FOCUS code to simulate the granular flow and heat transfer behaviors involved in the gravity-driven dense granular target. A solid sedimentation experiment was performed and simulated by FOCUS code. The simulation results were consistent with the findings in the experiment, which proved FOCUS to be an appropriate code to simulate the granular flow. Then the sensitivity analyses were performed to investigate the influence of the inlet flow rate and the target area shape on the state of the granular flow in the ADS granular spallation target. The simulation results showed that the velocity of each granular spallation target was related with the height of piled-up particles in the targets area. The geometry size of the target area obviously affected the flow state of targets. Meanwhile the inlet flow rate had a slight influence on the stable flow, unless the inlet flow was so large that targets overflow the target area. Furthermore, the study also calculated the heat transfer between each target and found that heat conduction between two contacted granular spallation targets was the main process in the targets area. The present work would be instructive for the ADS system design.
- 出版日期2018-4-15
- 单位西安交通大学; 中国科学院近代物理研究所
