A 3D Model of the Thermoelectric Microwave Power Sensor by MEMS Technology

作者：Yi, Zhenxiang^*; Liao, Xiaoping

来源：Sensors (Switzerland), 2016, 16(6): 921.

DOI：10.3390/s16060921

• 3D model
• power sensor
• thermoelectric
• GaAs MMIC
• micro-electro-mechanical system (MEMS) technology

In this paper, a novel 3D model is proposed to describe the temperature distribution of the thermoelectric microwave power sensor. In this 3D model, the heat flux density decreases from the upper surface to the lower surface of the GaAs substrate while it was supposed to be a constant in the 2D model. The power sensor is fabricated by a GaAs monolithic microwave integrated circuit (MMIC) process and micro-electro-mechanical system (MEMS) technology. The microwave performance experiment shows that the S-11 is less than -26 dB over the frequency band of 1-10 GHz. The power response experiment demonstrates that the output voltage increases from 0 mV to 27 mV, while the incident power varies from 1 mW to 100 mW. The measured sensitivity is about 0.27 mV/mW, and the calculated result from the 3D model is 0.28 mV/mW. The relative error has been reduced from 7.5% of the 2D model to 3.7% of the 3D model.

• 出版日期2016-6
• 单位东南大学