Fe/Al bimetallic particles for the fast and highly efficient removal of Cr(VI) over a wide pH range: Performance and mechanism

作者：Fu, Fenglian^*; Cheng, Zihang; Dionysiou, Dionysios D.; Tang, Bing

来源：Journal of Hazardous Materials, 2015, 298: 261-269.

DOI：10.1016/j.jhazmat.2015.05.047

• Fe/Al bimetallic particles
• Cr(VI) wastewater
• Removal
• Reaction mechanism

The iron/aluminum (Fe/Al) bimetallic particles with high efficiency for the removal of Cr(VI) were prepared. Fe/Al bimetallic particles were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), SEM mapping, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). SEM mapping showed that the core of bimetal was Al, and the planting Fe was deposited on the surface of Al. In acidic and neutral conditions, Fe/Al bimetal can completely remove Cr(VI) from wastewater in 20 min. Even at pH 11.0, the Cr(VI) removal efficiency achieved was 93.5%. Galvanic cell effect and high specific surface area are the main reasons for the enhanced removal of Cr(VI) by bimetallic particles. There were no iron ions released in solutions at pH values ranging from 3.0 to 11.0. The released Al3+ ions concentrations in acidic and neutral conditions were all less than 0.2 mg/L. The bimetal can be used 4 times without losing activity at initial pH 3.0. XPS indicated that the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)-Fe(III) hydroxide/oxyhydroxide on the surface of Fe/Al bimetal. The Fe/AI bimetallic particles are promising for further testing for the rapid and effective removal of contaminants from water.

• 出版日期2015-11-15
• 单位广东工业大学