An experimental and numerical study of water jet cleaning process

作者：Guha Anirban^*; Barron Ronald M; Balachandar Ram

来源：Journal of Materials Processing Technology, 2011, 211(4): 610-618.

DOI：10.1016/j.jmatprotec.2010.11.017

• CFD
• Jet cleaning
• Multiphase flow
• Numerical modeling
• Water jet

In this paper, we have experimentally, numerically and theoretically investigated the water jet cleaning process. Very high speed water jets (similar to 80-200 m/s) are typically used in such cleaning operations. These jets diffuse in the surrounding atmosphere by the process of air entrainment and this contributes to the spreading of the jet and subsequent decay of pressure. Estimation of this pressure decay and subsequent placement of the cleaning object is of paramount importance in manufacturing and material processing industries. Also, the pressure distribution on the cleaning surface needs to be assessed in order to understand and optimize the material removal process. In an industrial setting, an experimental study is performed to formulate the pressure characteristics. It has been shown that the decay of stagnation pressure along the axial direction is linear. It also revealed that no cleaning is possible at radial locations greater than 1.68D from the centerline. Numerical simulations are performed to capture the process of air entrainment in the jet and the subsequent pressure characteristics. The simulation results are found to correctly predict the experimental data. Moreover, a theoretical model for evaluating the optimal and critical stand-off distances has also been derived. Our results indicate that the optimal stand-off distance in cleaning operations is similar to 5D and the jet looses its cleaning ability at axial distances greater than similar to 26D.

• 出版日期2011-4-1