Graphite and platinum's catalytic selectivity for disulfide/thiolate (T-2/T-) and triiodide/iodide (I-3(-)/I-)

作者：Wu Hongwei; Lv Zhibin; Chu Zengze; Wang Dan; Hou Shaocong; Zou Dechun^*

来源：Journal of Materials Chemistry, 2011, 21(38): 14815-14820.

DOI：10.1039/c1jm11864a

Dye-sensitized solar cells (DSSCs) using pure graphite sheet as the substrate and catalytic material were first fabricated based on a disulfide/thiolate (T-2/T-) redox couple. It can present up to 4.79% of the power-conversion efficiency (PCE), compared with the 2.33% of triiodide/iodide (I-3(-)/I-) redox couple at the same experimental condition under AM 1.5 illumination (100 mW cm(-2)). In contrast, when FTO/Pt is used as the counter electrode, PCE values are 3.97% and 7.13% based on the T-2/T- and I-3(-)/I- redox couples, respectively. With respect to the above dramatic difference, cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) are applied to study the catalytic behavior at electrolyte (T-2/T- and I-3(-)/I-)/counter electrode (graphite sheet and FTO/Pt) interface. In particular, EIS indicated that the charge transfer resistance (R-CT) (1.1 Omega cm(2)) of the graphite sheet for T-2/T- is less than one-ninth of its R-CT (10.2 Omega cm(2)) for I-3(-)/I-. However, the R-CT of FTO/Pt (7.7 Omega cm(2)) for T-2/T- is more than twice the R-CT (3.0 Omega cm(2)) of I-3(-)/I-. This demonstrates the high catalytic selectivity of graphite and platinum (Pt) for the two redox couples. These results show the great potential of carbon materials to replace Pt by using this novel electron-transfer mediator in DSSCs.

• 出版日期2011
• 单位北京大学