APPLICATION OF GENERALIZED RNG TURBULENCE MODEL TO FLOW IN MOTORED SINGLE-CYLINDER PFI ENGINE

作者：Wang, Fang; Reitz, Rolf D.; Pera, Cecile; Wang, Zhi^*; Wang, Jianxin

来源：Engineering Applications of Computational Fluid Mechanics, 2013, 7(4): 486-495.

DOI：10.1080/19942060.2013.11015487

• internal combustion engine
• RANS
• generalized RNG model
• structured grids

This paper describes a generalized renormalization group (RNG) turbulence model applied to simulate non-reacting flows in an optical single-cylinder PFI engine. A structured computational mesh of the combustion system with complex geometry was generated by ICEM-CFD in conjunction with KIVA-3V code. Turbulent flow in the 4-valve engine, including the exhaust, intake, compression and expansion strokes, was simulated with the standard k-epsilon and a generalized RNG turbulence model using the KIVA-3V code. Crank angle-resolved results from available experimental data were used as the boundary and initial conditions for the calculation setup. Pressure traces of the simulation results were compared to the phase-averaged measured pressure trace. Predicted radial and vertical velocities along a horizontal line at BDC and radial velocities along the cylinder axis at four crank angles were compared with the experimental measurements. In addition, the velocity field calculated by the generalized RNG turbulence model was compared with experimental data from Particle Image Velocimetry (PIV) measurements. Good agreement was found between the experiment results and simulation results with the generalized RNG turbulence model.

• 出版日期2013-12
• 单位清华大学