A Combined Process of Formic Acid Pretreatment for Low-Temperature Bonding of Copper Electrodes

作者:Yang Wenhua*; Akaike Masatake; Fujino Masahisa; Suga Tadatomo
来源:ECS Journal of Solid State Science and Technology, 2013, 2(6): P271-P274.
DOI:10.1149/2.010306jss

摘要

A new combined process of formic acid pretreatment for low temperature Cu direct bonding was proposed. Cu film and Cu micro-electrodes samples were treated by formic acid and successfully bonded together at 200 degrees C. Cu surface oxide was reduced at 200 degrees C using formic acid treatment without/with Pt catalyst. Particularly, the treatment with heated Pt catalyst is more effective for Cu surface reduction than that without Pt catalyst or with room temperature Pt catalyst. After formic acid treatment under various conditions, Cu film and Cu micro-electrodes samples were bonded together at 200 degrees C in N-2. Among them, the bonded samples treated by formic acid using heated Pt catalyst showed the strongest bonding strength. Very few oxide and carbon was remained at the bonding interface. It also proves that the treatment can reduce surface oxide resulting in strong bonding at low temperature.

  • 出版日期2013