Discrete damage zone model for fracture initiation and propagation

作者：Liu Xia; Duddu Ravindra^*; Waisman Haim

来源：Engineering Fracture Mechanics, 2012, 92: 1-18.

DOI：10.1016/j.engfracmech.2012.04.019

• Fracture propagation
• Discrete cohesive zone models
• Damage mechanics
• Mixed mode fracture
• Delamination

We propose a discrete damage zone model (DDZM) aimed at simulating fracture initiation and propagation within the framework of the finite element method. In this approach, rather than employing specific cohesive laws, we employ damage laws to prescribe both interface spring softening and bulk material stiffness degradation to study crack propagation. For a homogeneous isotropic material the same damage law is assumed to hold in both the continuum and the interface elements. The irreversibility of damage naturally accounts for the reduction in material strength and stiffness if the material was previously loaded beyond the elastic limit. The model parameters for interface element are calculated from the principles of linear elastic fracture mechanics. The model is implemented in Abaqus and numerical results for single-mode as well as mixed-mode delamination are presented. The results are in good agreement with those obtained from the virtual crack closure technique (VCCT) and available analytical solutions, thus, illustrating the validity of this approach. Finally, the suitability of the method for studying fracture in fiber-matrix composites involving fiber debonding and matrix cracking is demonstrated.

• 出版日期2012-9