A Compact Kapton-Based Inkjet-Printed Multiband Antenna for Flexible Wireless Devices

作者：Ahmed Sana^*; Tahir Farooq A; Shamim A; Cheema Hammad M

来源：IEEE Antennas and Wireless Propagation Letters, 2015, 14: 1802-1805.

DOI：10.1109/LAWP.2015.2424681

• Flexible antennas
• inkjet printing
• Kapton
• multiband antennas
• wireless applications

A low-cost inkjet-printed multiband antenna envisioned for integration into flexible and conformal mobile devices is presented. The antenna structure contains a novel triangular iterative design with coplanar waveguide (CPW) feed, printed on a Kapton polyimide-based flexible substrate with dimensions of 70 x 70 x 0.11 mm(3). The antenna covers four wide frequency bands with measured impedance bandwidths of 54.4%, 14%, 23.5% and 17.2%, centered at 1.2, 2.0, 2.6 and 3.4 GHz, respectively, thus, enabling it to cover GSM 900, GPS, UMTS, WLAN, ISM, Bluetooth, LTE 2300/2500 and WiMAX standards. The antenna has omnidirectional radiation pattern with a maximum gain of 2.1 dBi. To characterize the flexibility of the antenna, the fabricated prototype is tested in convex and concave bent configurations for radii of 78 mm and 59 mm. The overall performance remains unaffected, except a minor shift of 20 MHz and 60 MHz in S11, for concave bending at both radii. The compact, lightweight and conformal design as well as multiband performance in bent configurations, proves the suitability of the antenna for future electronic devices.

• 出版日期2015