Modeling of disturbance torque in an aerostatic bearings-based nano-satellite simulator

作者：Liu Yanfang^*; Huo Mingying; Qi Naiming

来源：Journal of Systems Engineering and Electronics, 2018, 29(3): 618-624.

DOI：10.21629/JSEE.2018.03.19

• aerostatic bearing
• disturbance torque
• vortex torque
• spacecraft simulator
• modeling and identification

The disturbance torque of aerostatic bearings is in the same order of the reaction wheel, which causes difficulty in evaluation of the designed attitude control strategy of a nano-satellite based on the aerostatic bearing. Two approaches are proposed to model the disturbance torque. Firstly, the gravity induced moment, the vortex torque, and the damping moment are modeled separately. However, the vortex torque and the damping moment are coupled with each other as both of them are caused by the viscosity. In the second approach, the coupling effect is considered. A nano-satellite is constructed based on aerostatic bearing. The time history of the free rotation rate from an initial speed is measured by the gyro, which is further used to calculate the rotation angle and acceleration. The static vortex torque is measured via the removable micro-torque measurement system. Based on these data, the model parameters are identified and modeling errors are presented. Results show that the second model is more precise. The root mean squire error is less than 0.5x10(-4) N.m and the relative error of the static vortex torque is 0.16%.

• 出版日期2018-6
• 单位哈尔滨工业大学