Adjustable Load With Tracking Loop to Improve RF Rectifier Efficiency Under Variable RF Input Power Conditions

作者：Dehghani Soroush^*; Abbasian Sadegh; Johnson Thomas

来源：IEEE Transactions on Microwave Theory and Techniques, 2016, 64(2): 343-352.

DOI：10.1109/TMTT.2015.2512583

• Class-F synchronous rectifier
• RF rectifiers
• wireless power

Terminating an RF rectifier with an optimum load resistance is important to maximize the efficiency of converting RF power to dc power. The optimum load resistance can also vary significantly as a function of RF input power. Therefore, an adjustable load circuit that tracks changes in RF power is required to maximize efficiency. As a way of implementing an adjustable load circuit that can provide a regulated output voltage to power a host system, a two-stage power-conversion circuit is proposed. The first stage is a dc-to-dc discontinuous mode converter that is controlled by an input loop to regulate the load impedance presented to the RF rectifier. The analysis, design, and experimental results of the first stage adjustable load circuit with a tracking loop are described. The load is connected to a 985-MHz 10-W GaN Class-F RF rectifier and results with the load circuit are compared to the optimum load.

• 出版日期2016-2