Determination of Permeability and Inertial Coefficients of Sintered Metal Porous Media Using an Isothermal Chamber

作者：Zhong, Wei^*; Ji, Xiang; Li, Chong; Fang, Jiwen; Liu, Fanghua

来源：Applied Sciences-Basel, 2018, 8(9): 1670.

DOI：10.3390/app8091670

• porous media
• permeability
• inertial coefficient
• isothermal chamber
• discharge method

Sintered metal porous media are widely used in a broad range of industrial equipment. Generally, the flow properties in porous media are represented by an incompressible DarcyForchheimer regime. This study uses a modified Forchheimer equation to represent the flow rate characteristics, which are then experimentally and theoretically investigated using a few samples of sintered metal porous media. The traditional steady-state method has a long testing time and considerable air consumption. With this in mind, a discharge method based on an isothermal chamber filled with copper wires is proposed to simultaneously determine the permeability and inertial coefficient. The flow rate discharged from the isothermal chamber is calculated by differentiating the measured pressure, and a paired dataset of pressure difference and flow rate is available. The theoretical representations of pressure difference versus flow rate show good agreement with the steady-state results. Finally, the volume limit of the isothermal chamber is addressed to ensure sufficient accuracy.

• 出版日期2018-9
• 单位江苏科技大学