科研之友
微信
新浪微博
Facebook
分享链接
摘要
Cold enzyme hydrolysis was investigated on the ethanol production by Saccharomyces cerevisiae during simultaneous saccharification and fermentation (SSF) processing. An integrated statistical design, which incorporated single factor design, response surface methodology (RSM) and weighting coefficient method, was used to determine the optimum hydrolysis conditions leading to maximum biomass, ethanol concentration and starch utilization ratio. After the studied ranges of alpha-amylase, glucoamylase and liquefaction time were identified by single factor design, RSM was used to further optimize the hydrolysis conditions for each objective. The results showed that, under hydrolysis condition optimized with RSM, biomass, ethanol concentration and starch utilization ratio reached 4.401 +/- 0.042 x 10(8) cells/ml, 14.81 +/- 0.23% (wt.%) and 94.52 +/- 0.53%, respectively. Finally, multi-objective optimization (MOO) was applied to obtain a compromised result of three desirable responses by weighting coefficient methodology. Biomass of 4.331 +/- 0.038 x 10(8) cells/ml, ethanol concentration of 14.12 +/- 0.21% (wt.%) and starch utilization ratio of 92.88 +/- 0.21% were simultaneous obtained when hydrolysis at pH 5.9 for 114 mm with 233 IU/g(starch) alpha-amylase and 778 IU/g(starch) glucoamylase. The optimized conditions were shown to be feasible and reliable through verification tests.
