Determination of optimal operating factors via modeling for livestock wastewater treatment: Comparison of simulated and experimental data

作者：Ahn Jae Young; Chu Kyoung Hoon; Yoo Sung Soo; Mang Ji Sung; Sung Baek Woo; Ko Kwang Baik^*

来源：International Biodeterioration & Biodegradation, 2014, 95: 46-54.

DOI：10.1016/j.ibiod.2014.04.014

• Livestock wastewater treatment
• Parameter calibration
• Operational optimization
• Multiple-response surface methodology
• Applicability evaluation

This study evaluated the optimized operational conditions of a modified four-stage Bardenpho process via modeling for livestock wastewater treatment. The objective is to determine whether the effluent Korean water quality standards can be met using the modified process and ozone/activated carbon reactors. The parameters related to microbial respiration (i.e., Y-H, Y-A, mu(H), b(H) and i(xB)) and effluent concentrations (i.e., f(p), eta(g), K-h, and eta(h)) in GPS-X based on ASM1 were calibrated according to the influent characteristics. Consequently, the differences in the COD and TN concentrations of the calibrated and experimental results were 29.58 and 19.15 mg/L, respectively. A modeling method based on multiple RSM was used to determine the optimized operational conditions, resulting in a DO concentration of 6.6 mg/L in each aerobic reactor, an internal recycling rate of 4.9Q(in), and a sludge recycling rate of 1.4Q(in). Although the COD and TN concentrations during actual operation using the optimized conditions were slightly different than those predicted by GPS-X, the differences were not significant; therefore, the effluent Korean water quality standards were satisfied. With more specific criteria that reduce the differences between the predicted and actual concentrations, the modeling method for operational optimization would be sufficient under any circumstances.

• 出版日期2014-11