Preparation of Lithium Aluminum Titanium Phosphate Electrolytes Thick Films by Aerosol Deposition Method

作者：Popovici Daniel^*; Nagai Hideyuki; Fujishima Seigo; Akedo Jun

来源：Journal of the American Ceramic Society, 2011, 94(11): 3847-3850.

DOI：10.1111/j.1551-2916.2011.04551.x

Aerosol deposition method was used as an alternative deposition technique in crystalline electrolyte deposition process. Crystalline Li(1.3)Al(0.3)Ti(1.7)(PO(4))(3) thick layers were successfully deposited on stainless-steel substrates and X-ray diffractometry, scanning electron microscopy, transmission electron microscopy, and AC impedance techniques were used to characterize these films. The density of the deposited films was between 83% and 86% of the theoretical density and Vickers hardness was calculated to have values between 260 and 280 Hv. Bulk and total conductivities were 3.62 x 10(-3) and 1.12 x 10(-6) S/cm, respectively, and DC conductivity was <10(-10) S/cm for a wide range of film thicknesses. Improvement in total conductivity of the Li(1.3)Al(0.3)Ti(1.7)(PO(4))(3) samples is still needed to make these films more suitable for all-solid-state Li-ion batteries.

• 出版日期2011-11