Aluminum-thin-film packaged fiber Bragg grating probes for monitoring the maximum tensile strain of composite materials

作者：Im Jooeun; Kim Mihyun; Choi Ki Sun; Hwang Tae Kyung; Kwon Il Bum^*

来源：Applied Optics, 2014, 53(17): 3615-3620.

DOI：10.1364/AO.53.003615

In this paper, new fiber Bragg grating (FBG) sensor probes are designed to intermittently detect the maximum tensile strain of composite materials, so as to evaluate the structural health status. This probe is fabricated by two thin Al films bonded to an FBG optical fiber and two supporting brackets, which are fixed on the surface of composite materials. The residual strain of the Al packaged FBG sensor probe is induced by the strain of composite materials. This residual strain can indicate the maximum strain of composite materials. Two types of sensor probes are prepared-one is an FBG with 18 mu m thick Al films, and the other is an FBG with 36 mu m thick Al films-to compare the thickness effect on the detection sensitivity. These sensor probes are bonded on the surfaces of carbon fiber reinforced plastics composite specimens. In order to determine the strain sensitivity between the residual strain of the FBG sensor probe and the maximum strain of the composite specimen, tensile tests are performed by universal testing machine, under the loading-unloading test condition. The strain sensitivities of the probes, which have the Al thicknesses of 18 and 36 mu m, are determined as 0.13 and 0.23, respectively.

• 出版日期2014-6-10