Numerical modeling of the double punch test for plain concrete

作者：Pros Alba^*; Diez Pedro; Molins Climent

来源：International Journal of Solids and Structures, 2011, 48(7-8): 1229-1238.

DOI：10.1016/j.ijsolstr.2011.01.006

• Double punch test
• Plain concrete
• Modeling
• Numerical simulation
• Finite element method
• Nonlocal Mazars damage model
• Fracture mechanics
• Joints
• Validation

Double punch test is used to indirectly assess the tensile strength of plain concrete, f(r). For this normalized test, the tensile strength is obtained as a function of the failure load, P. which is expressed as f(r) = Different authors have proposed different expressions for the relation F(.), yielding scattered values off,. None of these alternatives is universally recognized as being more suitable than the others. In fact, these expressions are mainly based on elastic models considering the maximum tensile stress under the load P and f(t) is obtained as an output of the linear model. A numerical simulation allows using models in which f(t) is an input of the material model and the corresponding failure load P is obtained associated with each value of f(t). In the present work, double punch test is simulated numerically considering two alternatives for modeling plain concrete accounting for damage and cracking: (a) the nonlocal Mazars damage model and (b) an heuristic crack model including joint elements in an a priori defined crack pattern. Numerical results are validated with experimental data and compared with the analytical expressions available in the literature.

• 出版日期2011-4