Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay

作者：Masa Abdulhakim; Saito Hiromu^*; Sakai Tadamoto; Kaesaman Azizon; Lopattananon Natinee^*

来源：Journal of Applied Polymer Science, 2017, 134(10): 44574.

DOI：10.1002/app.44574

• blend
• morphology
• polypropylene
• rubber

Nanocomposites of natural rubber (NR)/polypropylene (PP) (80/20 wt %) blends filled with 5 phr pristine clay were prepared by melt-mixing process. Effects of clay incorporation technique via conventional melt-mixing (CV) and masterbatch mixing (MB) methods on nanostructure and properties of the blend nanocomposites were investigated. The XRD, SAXS, WAXD, and TEM results showed that the clays in the NR/PP blend nanocomposites were presented in different states of dispersion and were locally existed at the interface between NR and PP as well as dispersed in the NR matrix. The presence of clay caused unique morphological evolution such as fine fibrillar PP domains. The tensile strength was improved over the unfilled NR/PP blends by 53% and 224%, and the storage modulus at 25 degrees C was increased by 78% and 120% for the NR/PP/clay nanocomposites prepared by CV and MB methods, respectively. Significant improvement in both properties was particularly obtained from the MB method due to finer dispersion fibrillar PP phase in the NR matrix and stronger interfacial adhesion between NR and PP fibers, as suggested from DMA. The oil resistance of blend nanocomposites was also improved over that of the unfilled NR/PP blend, and this property was further progressed by the masterbatch mixing method.

• 出版日期2017-3