科研之友
微信
新浪微博
Facebook
分享链接
摘要
Friction stir processing (FSP) is a novel technique to produce ultrafine grained materials. Most of the researches conducted on FSP focus on aluminum alloys. Despite the potential weight reduction that can be achieved by using magnesium alloys, a few researches have been reported on FSP of magnesium alloys. In this work, the possibility of using FSP with and without SiC particles to modify the microstructure and hardness of commercial AZ31 is examined. SiC particles were uniformly dispersed into an AZ31 matrix by FSP. The mean grain size of the stir zone with the SiC particles was obviously smaller than the same zone without the SiC particles. SiC reinforced magnesium matrix composites created by FSP with cooling rapidly the plate that exhibit ultrafine grain size approximately 1 mu m and nearly doubled the hardness of the base material.
- 出版日期2008-7-30
