Morphology of Upper and Lower Bainite with 0.7 Mass Pct C

作者：Yin Jiaqing^*; Hillert Mats; Borgenstam Annika

来源：Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2017, 48A(9): 4006-4024.

DOI：10.1007/s11661-017-4208-5

There has been an on-going discussion on the difference in formation mechanisms of upper and lower bainite. Various suggestions have been supported by reference to observed morphologies and illustrated with idealized sketches of morphologies. In order to obtain a better basis for discussions about the difference in mechanism, the morphology of bainite in an Fe-C alloy with 0.7 mass pct carbon was now studied in some detail from 823 K to 548 K (550 A degrees C to 275 A degrees C) at temperature intervals of 50 K or less. The work focused on bainite seen to start from a grain boundary in the plane of polish and showing an advancing tip in the remaining austenite. The results indicate that there is no essential difference with temperature regarding the ferritic skeleton of feathery bainite. The second stage of bainite formation, which involves the formation of both ferrite and cementite, was regarded as a eutectoid transformation and the resulting morphologies were analyzed in terms of two modes, degenerate and cooperative eutectoid transformation. There was no sharp difference between upper and lower bainite. Ways to define the difference were discussed.

• 出版日期2017-9